If you’re looking for a fun activity for the whole family, then why not bring the dog and go to Chief Logan State Park for the Drool in the Pool fundraiser? This event is part of a fundraising campaign to raise money for the Neenah Animal Shelter.

Dog-only swim at Chief Logan State Park

The Chief Logan State Park is a public recreation area located in Logan County, West Virginia. This 4,000-acre park is a great destination for those looking to get out and enjoy the outdoors. Some of the amenities include a wildlife center and hiking trails. In fact, this is one of the most visited state parks in the entire West Virginia state park system.

The most obvious attraction is the lake. It’s located on rolling Appalachian foothills in the southeastern Hocking Valley. There are over 400 acres of lake and prime fishing opportunities. You may also want to check out the nearby Hatfield-McCoy ATV trails.

During the summer months, there are more than a few pet friendly accommodations. Some of these units are equipped with full water and sewage hookups. On the flip side, there are units without these amenities.

Chief Logan is a great place to spend a weekend. Several of its RV campsites offer multiple hookups, and its lodge is a welcome addition to the city. Other amenities include an indoor pool, hot tub, and a fitness center.

For those looking to stray a bit further afield, the Yellowstone National Park in Montana and Beech Fork State Park in Wyoming are only about an hour away. Although both states are in the Rocky Mountains, they are a bit more temperate. One of the most impressive feats of this park is its location. It’s only a short drive from the nearest major cities. If you’re in the mood for a change of scenery, consider the many other state parks in the area.

As you can imagine, the park is a popular destination with its size and diversity. This means that you’ll likely encounter other people on your travels. Nonetheless, it’s always a good idea to pack appropriately for the season. Also, the best time to visit is the offseason.

Of course, if you’re able to make it in the winter, you’ll be rewarded with a stunning natural wonder. That’s not to mention the perks of being near one of the largest coal mining towns in the United States.

Fundraiser for the Neenah Animal Shelter

The Neenah Pool is a popular spot for families and dogs to enjoy a little playtime. Drool in the Pool is a fun and interactive event that features a wide array of aquatic activities and amenities. In addition to the usual suspects, the Neenah Pool also features an elaborate sand play area, a 146 foot flume slide, and a large concessions area.

The Neenah Pool, also known as the Furry Flurry, is a fun and exciting annual event that raises money for the Neenah Animal Shelter. The Neenah Parks & Recreation Department has been putting on the event since 1997, and it is one of the largest fundraisers in the state. This is a great opportunity to enjoy the best of the Neenah borough, including the city’s best golf course, while benefiting a worthy cause. Whether you are in the market for a new best friend, or simply looking for a fun family outing, the Furry Flurry is not to be missed.

In addition to the requisite doggie goodies, the Furry Flurry will feature pet portraits, a pet massage, a 2K pet walk, and a number of other attractions. All pets are vetted and microchipped before they are adopted, so you can rest easy knowing that your best bud is a happy and healthy member of the family. You can check out some of the animals while you sip on a cup of java, or grab a bite to eat from some of the restaurants located at the aforementioned Country Club. It is also a dog-friendly borough, with several parks and a dog park to boot. Despite being in the heart of Wisconsin, the Furry Flurry is a pleasant respite from the rigors of the state’s daily grind.

One of the best parts of the Furry Flurry is that the organizers really do listen to their customers. As a result, visitors will be greeted by smiling and friendly employees, and even have a chance to win a kayak if they are so inclined. Moreover, there are no other events of the same caliber in the area, so you will have an ideal excuse to treat yourself and your pup to a day at the spa.

Dangers of fecal matter in the pool

If you’re a pool owner, you know how important it is to maintain a clean and safe swimming environment. However, fecal matter in the pool is one of the most common causes of recreational water illness (RWI).

Fecal matter in the pool can be contaminated with bacteria and other germs that cause illness. To prevent RWIs, you need to follow the Centers for Disease Control and Prevention’s recommendations.

You should wear disposable gloves when you clean up a fecal incident. You should also disinfect the tools you use. Also, it is recommended that you not vacuum or brush feces into the pool.

While chlorine is a common disinfectant, it does not kill germs instantly. It takes several days for bacteria like E. coli and Cryptosporidium to die.

The good news is that most illnesses associated with diarrhoea are cured by swimming in a properly disinfected pool. In addition, a pre-swim shower with soap and water is a great way to limit fecal pathogens.

Despite this, the CDC warned swimmers to avoid pools when they’re sick. They also released a report on public pools that showed widespread fecal contamination.

In this report, 58 percent of the samples tested positive for bacteria. This suggests that the pool was contaminated with human feces. When you go to a pool, you should alert staff if you’ve had a fecal incident.

In an outbreak at a Pennsylvania community pool, 15 children became ill. This was attributed to an outbreak of E. coli, a bacterium found in humans and animals.

Cryptosporidium is another bacterial parasite that can be passed from person to person by ingestion or by swallowing contaminated water. Young children are most at risk of getting this infection. Fortunately, this type of parasite is not commonly found in formed stools.

The best way to prevent fecal matter in the pool is to have a reputable swimming pool company take care of the maintenance and cleaning. You should also keep a close eye on pH levels and disinfection.

Even the best swimming pool can be a source of fecal matter in the water. A new study shows that the water in treated pools contains fecal bacteria.

Upload a photo of your pet

When it comes to dog days of summer, a swim in the pool is the perfect way to spend time with your dog. Not only is it a fun way to stay cool, but you can also take a photo of your pet. You can upload the image to Splash Your Pup, a social networking site where people can share photos of their dogs and cats.

To get started, visit the site and click on the Upload Photos button located under the Animal Photos heading. Then, choose the images you want to upload. For each picture, you can select it from your computer or mobile device. Once you have the selected images, you can add captions and print out your pet’s profile. If you’d like to post your photos, you can use the hashtag #bringfido on social media.

Now that you have your photo uploaded, be sure to share it with friends and family. Share it on Facebook and Twitter with the hashtag #bringfido for your chance to win a pet photo contest. The Palmyra-Macedon Middle School Student Council will select the winning entries from the photos, and the winners will receive an award. Also, the staff at the middle school is encouraged to enter their photos into the contest. So, be sure to upload your photos today. By doing so, you’re showing off your pets’ cuteness and giving them a chance to win a prize!

If you are looking to build or remodel a pool in your backyard, you may be wondering if a saltwater system is right for you. A saltwater system provides the benefits of lowering the levels of chlorine in your pool, but there are some trade-offs as well. Here are some of the pros and cons of using a saltwater system for your swimming pool.

pH and ORP sensors to measure and adjust chlorine levels

If you own a salt water pool, you may want to know more about pH and ORP sensors. These instruments can provide accurate and easy-to-read results that you can use to maintain and adjust your chlorine levels.

There are several types of pH and ORP sensors available. You can choose one based on your budget and needs.

If you have a small pool, you might be able to get away with using a consumer-grade device. However, if you are looking for more precise results, you might want to invest in an amperometric free chlorine sensor. This device uses electrochemistry to measure the level of free chlorine in the water.

You might also want to consider an OCl- and HOCl sensor. While these devices are more expensive than ppm chlorine sensors, they provide more accurate measurements. OCl- and HOCl sensors work similarly to ORP sensors.

An ORP sensor works like a miniature battery. It contains two electrodes and is placed in a plumbing line. The membrane between the electrodes prevents contaminants from entering the sensor. When chlorinated pool water passes through the probes, it exchanges electrons with the platinum or gold electrode.

Chlorine and oxygen contribute to higher ORP readings in the water. A higher ORP value means that the water is better at destroying contaminates, and it is therefore a more sanitary swimming pool.

While chlorine is the primary oxidizer, ORP is also affected by other factors, including the pH and combined chlorine. For instance, a high pH decreases the effectiveness of chlorine, while bright sunlight lowers the oxidation-reduction potential (ORP) of the water.

A low ORP reading indicates that your pool is not as sanitized as it should be. Your local health department might require you to monitor your chlorine and ORP levels. Alternatively, you might use an automated system that feeds chemicals on demand.

When using an automated chemical feeder, you can reduce your maintenance costs. Additionally, it can also increase your comfort and safety. Some devices even feature auto-shock treatments.

Using an ORP and PPM control system can accurately measure your water’s true quality, and help you maintain the levels of PPM and ORP that your local health department requires. Whether you own a large or small pool, an ORP and PPM controller can help you achieve the best possible health for your family.

Acidic water can corrode metal components in the pool

If you have a swimming pool or hot tub, you need to know how to prevent acidic water from dissolving metal components in the pool. This can be a serious problem. It can damage your equipment, destroy your surfaces, and even cause medical problems. Here are some tips to help you avoid this issue.

The first step is to test the pool’s pH level. Water with a pH lower than 7.2 is considered acidic. As a result, it will eat away at your metal equipment, resulting in corrosion.

The next step is to remove any dissolved metals. You can do this by using a metal treatment product. These products are specifically designed to dissolve and bind metals in water. They can be purchased at your pool supply store.

There are also tests available to measure the free dissolved metals in your pool water. The resulting measurements can tell you if there is an issue. However, these tests will not measure if there is a complexed dissolved metal.

Another common source of metal contamination is lawn fertilizers. If the soil in your yard has a high concentration of plant fertilizers, this can enter your pool. Additionally, irrigation systems that use well water can introduce metals.

Finally, acidic rain can carry metals to your pool. It can affect your pH balance, and it can damage your surfaces and your metal pool accessories.

If you aren’t sure how to handle acidic water, consult a pool professional for advice. Getting professional assistance can save you time and money.

Acidic water can corrode metals on your surfaces and in your filtration equipment. For example, it can destroy the copper heat exchanger in your pool. Other problems can occur when you increase the alkalinity of your pool’s water.

In addition, acidic rain can also dissolve metals in soil and groundwater, causing pinhole leaks. Rust can form on pool light screws. To combat this, you can add rust inhibitors to your water.

In some cases, it may be necessary to increase the total alkalinity in your pool. High alkalinity can lead to other issues, such as scaling on your surface and plumbing fixtures.

They are more efficient to operate

Saltwater systems are a lot more efficient to operate than conventional chlorine systems. A saltwater system uses electrolysis to create low levels of natural chlorine. Compared to freshwater pools, saltwater is more forgiving on skin, hair, and eyes. It also requires less maintenance, and it’s not hard to install.

The most obvious reason for choosing a saltwater system is the savings in maintenance and chemical costs. Conventional pools require frequent chemical additions and testing to keep the water sparkling clean. Plus, the cost of chlorine chemicals stacks up quickly.

In the long run, a saltwater pool may save you as much as 40% compared to a traditional chlorine pool. Even better, you don’t have to worry about corrosive substances. Some people aren’t fond of the smell of chlorine.

If you’re thinking about switching your pool to a saltwater system, be sure to do your homework. There are many options to choose from, so don’t let the myriad choices overwhelm you.

In order to figure out which is the best system for your needs, you’ll have to calculate your budget. For most pool owners, it’s probably best to start with the most economical option. Depending on the size of your pool, you could pay around $1,500 to $2,500 for a new saltwater chlorination system.

Of course, if you are already paying for a chlorine pool, you don’t have to go through all the hassles of switching. Besides, you don’t want to end up with a swimming pool that’s too salty or too cold.

Likewise, if you have a smaller swimming pool, you don’t want to spend a fortune on an advanced saltwater system. Fortunately, the best option for your budget isn’t too hard to find. Almost any pool company should be able to install a saltwater pool system for you in a matter of hours.

While it’s not a requirement, a saltwater system will give you a fun experience and a less harsh swim. Unlike a traditional pool, there are no sharp edges and no stinging chlorine.

However, you’ll still need to take care of the equipment. This includes a pump, a filter, and a cover. Keeping it in good shape will help your system last longer.

They come at a premium

Saltwater pools are an environmentally friendly alternative to chlorine. But before you buy a salt system, there are a few things to keep in mind.

Salt water pools require more maintenance than regular swimming pools, which makes them a bit of a learning curve. Thankfully, there are some products that simplify the process and help you maintain your pool.

The Saltron Mini Salt System, for example, is very easy to install and does not require a lot of energy. In fact, you can install it in under eight minutes.

However, you should take note that installing a salt system for your pool can cost a lot of money. Depending on your pool’s size, the cost can range from $1,500 to $2,500.

Unlike a chlorine pool, your saltwater pool does not emit any pollutants. This makes it a good choice for anyone who has allergies. It is also a safer choice for children. Aside from its safety benefits, a salt water pool will help you avoid backwashing your pool.

Other factors to consider are the cost of salt, the volume of water, and the bather load. These are all vital aspects when deciding on a system.

While there are many different options for salt water systems, the best are those made by Hayward. Their systems are designed to offer consistent performance and durability. If you are looking to build a commercial pool, the Hayward Goldline AQR9 is a good option.

There are also newer models that are designed to be affordable. Some even feature a built-in timer. When you decide to invest in a salt system, do not forget to check out the costs of salt cell replacement.

Saltwater pools also have the advantage of being less expensive to operate over the long term. Unlike a chlorine pool, you do not need to pay for weekly shock treatments. Also, there are no pollutants escaping into the air.

Whether you are looking for a salt system for your spa or your own backyard pool, there are plenty of great options available. By doing your research, you will be able to find the perfect solution for your needs.

Backwashing your DE filter is an important part of maintaining the quality of the water in your pool. Keeping it clean helps to prevent the buildup of algae and debris that can harm plants, groundwater, and aquatic life. When it comes time to backwash, there are some tips and considerations to keep in mind to ensure that you do not end up damaging the filter.

Cleaning a DE filter

If you have a DE filter in your swimming pool, it’s important to keep it clean. The DE filter helps keep the water in your pool clean by filtering the debris that makes its way into the pool. Cleaning your DE filter is as important as adding chemicals and brushing the surfaces of your pool.

Typically, the manufacturer recommends cleaning your DE filter every couple of years. It’s important to check the pressure gauge on your filter to determine when it needs cleaning. A dirty DE filter will cause the pressure to increase. Backwashing your filter will help to remove the dirt and debris inside the filter.

Before you start cleaning your DE filter, make sure to properly lubricate the O-ring on the tank. This will help to make it easier to open and close the lid. Also, check the pump before you begin. Make sure to switch the pump off before starting the backwashing process.

Once you have cleaned the filter, you can return it to its home in your pool. Some filters have a drain pipe attached, and this should be removed. Otherwise, the runoff from your DE filter should be placed in a large trash bin.

When you are ready to start the backwashing process, you’ll need a pump and a hose. You may want to consider investing in a flow meter to see how efficiently your filter is working.

In the event your filter hasn’t been cleaned for awhile, it’s probably dripping with gunky liquid. This is because of the filter’s inability to maintain suction. To remove this gunky liquid, you’ll need a garden hose and a good amount of force. However, using a powerful pressure-washer may damage the filter and possibly break the grids.

While the pool filter is not the most glamorous component of your swimming pool, it’s an essential part of maintaining your pool. So, keep it in tip top shape and clean it regularly to maximize its lifespan.

If you’re not sure how to clean your DE filter, consult the manufacturer’s instructions. These can usually be found on your pool equipment’s manual or via a Google search.

One of the most common reasons for a DE filter to become dirty is excess swimmer load. This can be a result of a lot of people coming and going from the house, or a long week of friends and family enjoying the pool. Similarly, excess tanning oils, sunscreen, and hair products can clog your DE filter.

A cloudy pool is another indicator that your filter needs to be cleaned. Dirt and sediment will enter the pool and if left unchecked, can clog the filter grids. Adding chemicals to the water will help to break down this material.

Preventing damage to plants, groundwater, and aquatic life

Backwashing a pool DE filter is a great way to keep your pool in tip top shape. Besides removing the icky, smelly pool water, it can also improve the longevity of your pool’s filter. The backwash trick isn’t hard to do, and it may even save you some money in the long run. There are no complicated steps involved, just a few extra pieces of equipment to buy and a few minutes of your time.

For instance, did you know that a pool with a dirty filter has a lower flow rate and results in algae blooms? Similarly, a pool with a clogged filter can cause the filter to work slower. In addition, a backwash can eliminate hundreds of gallons of water, which will reduce the amount of chlorine that your pool requires.

Whether you’re using a PVC or sand filter, you can backwash your pool with minimal hassle. Unlike a regular cleaning, this process does not require you to take your filter apart. If you’re unsure about how to do it, check your owner’s manual.

Performing a proper backwash will get rid of the dirt, grime and debris that have built up inside your filter over the years. You can also help your filter last longer, saving you a few bucks in the long run. It might also get you off the hook for a fine, depending on your city’s local ordinances.

As for what to do with the excess water, some cities will allow you to dispose of it in storm drains, while others require you to go through a permit process. Depending on your location, you may have to hire a contractor to construct a dry well, a small hole in the ground where the water can be collected and disposed of. However, a dry well isn’t cheap, and can cost thousands of dollars to build. A better option might be a simple sump pump. These can be purchased at home improvement stores and can typically handle 20 gallons per minute.

The most important part of any backwash is to remember to properly dispose of the waste. Fortunately, there are many companies out there that can help you do just that. Several of them are even able to offer free consultations for homeowners with the right questions.

Some other good practices include using aeration to reduce the level of chlorine in your pool. Other tips to consider include avoiding over-use of chemicals, and checking the pH level of your water. Another thing to watch out for is the use of hair products, tanning oils, and other materials that can clog your filter. Ultimately, your best bet is to take all precautions to keep your pool clean and your pool water safe.

Backwashing after a heavy rainstorm

When a heavy rainstorm has caused your pool water to become dirty, you may need to backwash the filter. Backwashing a pool DE filter helps to keep the sand and media clean. It also extends the life of your filter. You can backwash your DE filter once or twice a month to help keep the system in good shape. The first step is to check the pressure gauge on your filter. If the reading is too low, the filter needs to be cleaned.

When your filter is filled with dirt and debris, it can reduce the flow rate and increase the pressure in the tank. Depending on the size of your filter, it may need to be backwashed several times in order to remove all of the particles. Larger filters can take up to five or six minutes to completely clean. Smaller filters can be done in about two to three minutes.

To start the process, you should remove the grids from the DE filter and clean them. You will also need to rinse the filter. While you’re at it, you might as well replace the DE media that is inside of the filter. This will help to get rid of any clogs that are on the grids.

Next, you’ll need to turn off your pump motor. This will prevent any new water from entering your filter. Ensure that the pressure in the filter is at least seven psi higher than it was when the filter was running clean.

When you’re ready to backwash, raise the hose to the filter. You’ll need a metal hose clamp to secure the hose. Make sure the hose does not twist or bend. Once it’s secured, you can lower the hose.

When you’re done, the water should look clean and clear. However, you’ll want to check your filter pressure again. During a heavy storm, the pressure can be high and can cause your filter to cycle short.

Check the skimmer strainer basket during the filtration process. If you don’t have a vacuum, you’ll need to repeat the backwashing procedure.

Lastly, you’ll need to run the circulation system to clear out any accumulated debris in the pool. Normally, it takes a couple days to run the circulation system. If you’re unable to do it, you can put it on a timer. Afterwards, you can set the timer to turn off the automation system.

If you have a backwash valve, you’ll need to adjust the valve to the backwash mode. Some models of filters will require you to use a plunger or a multivalve. Regardless of which type you have, you should make sure you follow the manufacturer’s instructions.

Most local authorities will recommend you backwash your water to a sewer. If you do not have a sewer, you can run it to the storm drain. Doing so will help to prevent flooding and erosion.

In Texas, the value of a home with a pool is generally considered to be higher than a comparable home without a pool. As a result, the property taxes on a home with a pool may be higher than the property taxes on a home without a pool.

Property taxes in Texas are based on the value of the property, as determined by the county appraiser. The value of a property is typically determined based on factors such as the size and location of the property, the age and condition of the home, and any special features or amenities the property may have, such as a pool.

If you own a home with a pool in Texas, it’s important to keep in mind that the value of your property may be higher than a comparable home without a pool, and as a result, your property taxes may be higher. You can typically find information about the value of your property and your property taxes by contacting your county appraiser or visiting your county’s website.

Overall, whether or not a pool will increase property taxes in Texas will depend on the value of the property and the property tax rate in the county where the property is located. It’s important to consider the potential impact on property taxes when deciding whether to install a pool or purchase a home with a pool.